The influence of volumetric feeder maintenance on equipment
Release time:
2021-11-25 10:15
Source:
Regarding the volumetric feeder manufacturer, the advantage of protecting the volumetric feeder is that it can extend the life of the equipment and the measurement accuracy is more accurate; perhaps the customers who use the volumetric feeder do not understand this, and then I and everyone Analyze: The volumetric feeder is a conveying and metering device used in the batching process section. In this competitive environment, if you want to improve the profitability of the product, not only the product quality must be good, but the raw materials must be the best Use to avoid waste of raw materials.
This is related to the unevenness of the measurement accuracy of the volumetric feeder. Among the factors that affect the measurement accuracy of the volumetric feeder, in addition to the measurement accuracy that the equipment itself can achieve, the protection of the volumetric feeder also plays a very important role. A large share, the handling of the material on the belt of the volumetric feeder, the cleaning of the dust on the sensor, the cleaning of the dust in the control system, etc., these are all factors that affect the measurement accuracy of the volumetric feeder, so do a good job The protection operation of the volumetric feeder is very important and has many advantages.
First, reduce the impact of ore on the volumetric feeder. The traditional method is to reduce the inclination of the rear wall of the silo after experiments based on the specific conditions of each unit. However, this method will make the material slide unsmoothly, which is detrimental to production. In this way, in order not to affect the production on the one hand, and to solve the impact problem on the other hand, the particle size of the ore entering the silo can be restricted, if it must be less than 800 mm, the thickness of the rear part of the volumetric feeder must also be determined. Requirements, if it must be more than 1 meter;
Second, it can also enhance the impact resistance of the volumetric feeder, which can strengthen the support beam at the rear of the volumetric feeder and enhance the impact resistance of the slide rail at the rear of the volumetric feeder;
Third, it can be improved by checking the starting capacity of the main motor of the volumetric feeder. After general force analysis, the results show that the reason why the volumetric feeder cannot be started under heavy load is mainly because of the volumetric feeding. The starting torque of the main motor does not match the load torque. Therefore, the main motor of the volumetric feeder is replaced, and the main motor of the volumetric feeder that is economical and can meet the requirements of heavy-load launching can be selected.
Related News
Share with your friends
Copyright© ZhongGe intelligent technology
powered by: www.300.cn
Zhongge Intelligence (Wuxi)
E-mail:andy wang@zgims.com
Address: Wuxi City, Jiangsu Province
Zhongge Intelligence (Changzhou)
E-mail:dhd@zgims.com
Address: Jintan District, Changzhou City, Jiangsu Province
What services are provided to you?